Voltage Sensor Module -Arduino Compatible

16 February 2017 User Review

Check your delivery options:

(Additional GST, if applicable, will be charged at checkout.)

10 in stock


This module is based on resistance points pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage.

The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V ( if for 3.3 V system, the input voltage will not more than 3.3 V x 5 = 16.5 V ). 

Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 0.00489 V (5 V / 1023), and the input voltage of this module should be more than 0.00489 V x 5 = 0.02445 V.


GND –  This is where you connect the low side of the voltage you are measuring.   Caution! : This is the same electrical point as your Arduino ground.
VCC:  The is where you connect the high side of  the voltage you are measuring


S:  This connects to your Arduino analog input.
– (or minus):  This connects to your Arduino ground.
+:  This is not connected.  It does absolutely nothing.


  • Voltage input range : DC0-25 V

  • Voltage detection range : DC0.02445 V-25 V

  • Voltage analog resolution : 0.00489 V

  • DC input interface : red terminal positive with VCC, negative with GND


  • DC measurement

  • Power measurement

  • Power quality measurement


User Review (0)
Related Items