08 February 2019 User Review

Check your delivery options:

(Additional GST, if applicable, will be charged at checkout.)

10 in stock

This one  Starter Kit with UNO R3 for Beginners is a great for absolute beginners  UNO Kit. 

The kit comes with numbered components that would create 15 unique projects from a blinking LED to an RGB light dimmer.

One of my favourite things about this Arduino UNO kit is something that’s very under-appreciated when it comes to electronics kits — each piece is clearly labeled.

It is never a bad idea to have extra parts like LEDs, jumper wires, resistors around. Beginners can learn the basics of Arduino programming as well as the expert in programming. From this kit, you will get what Arduino is all about and how it is used.

Whether you are a beginner or already have experience with Arduino under your belt, This Advanced Arduino kit by ROBU.IN will be a fun way to expand your knowledge.

Building some creative and simple projects is a great way to walk through coding and basic electronic circuits knowledge.

This kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take you from a beginner to an enthusiast. It includes all of the basics: an Arduino UNO board, breadboard, cables, LEDs, resistors, and pushbutton switches.

Great for robot prototyping: Includes Servo motor, LCD module and etc.

Note: 9V Non-Rechargeable Battery is not included in a package, you need to buy it separately.

Specification and Features :

All-in-one kit, a great starter kit for learning coding.
Great for Starting with Arduino Programming
Variety of components are included in this pack to try out different projects.
The kit comes with quality components assured by
Arduino UNO Specs:

Model Type: UNO Rev R3
Microcontroller Chip: ATmega328
Input Voltage(Recommended): 7-12V
Input Voltage (limit): 6-20V
Operating Voltage: 5
Analog I/O Pins: 6
Digital I/O Pins: 14 (of which 6 provide PWM output)
PWM Digital I/O Pins: 6
DC Current per I/O Pin: DC Current per I/O Pin: 40 mA; DC Current for 3.3V Pin: 50 mA
Clock Speed: 16 MHz
EEPROM: 1 KB (ATmega328)
Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
PWM Output Pins: 6
SRAM: 2 KB (ATmega328)
Power Supply Option: DC Jack or USB
On Board LEDs: Yes
Operating Temperature (°C): -40 to +90
Dimensions in mm (LxWxH): 75 x 54 x 12
Weight (gm): 26

Package Includes :

1 x UNO R3.
1 x High-Quality Retail Box
1 x USB cable.
1 x 65 Jumper Wires.
1 x 830 Point BREADBOARD.
15 x led (Red, Green, Yellow).
30 x Resistance(220R, 10K, 1K).
1 x 10 pin Dupont Line(Male to Female).
1 x Potentiometer.
1 x Active Buzzer.
1 x Passive Buzzer.
1 x 74HC595N.
1 x Infrared Receiving Head.
1 x LM35DZ.
1 x Flame Sensor.
2 x Roll Ball Switch.
3 x 5mm LDR.
5 x Button Switch With Cap.
1 x IR Remote Control.
1 x One Digital Tube.
1 x Four Digital Tube.
1 x 8*8 Dot Matrix Tube.
1 x UNL2003 Driver Board.
1 x 5V Stepper Motor.
1 x Prototype Shield V.5
1 x LCD Display 16×2
1 x Tower Pro SG90 Servo Motor
1 x 2*AA Battery Holder with Connector

User Review (0)
Related Items