PIC16F84A Microcontroller IC

01 January 1970 User Review

Check your delivery options:

110.00
(Additional GST, if applicable, will be charged at checkout.)

23 in stock

The PIC16F84A belongs to the mid-range family of the PICmicro® microcontroller devices.The program memory contains 1K words, which translates to 1024 instructions, since each 14-bit program memory word is the same width as each device instruction. The data memory (RAM) contains 68 bytes. Data EEPROM is 64 bytes. There are also 13 I/O pins that are user-configured on a pin-to-pin basis. Some pins are multiplexed with other device functions.

These functions include:

  •  External interrupt
  •  Change on PORTB interrupt
  •  Timer0 clock input

SPECIFICATIONS:

  • Maximum CPU Frequency: 20 MHz
  • Architecture: 8 bit 
  • Program Memory (Flash): 1.75 kB
  • RAM: 68 byte
  • Internal Oscillator: No
  • ADC: No
  • No. of Pins: 18
  • Voltage: 2V - 6V

SPECIAL FEATURES:

  • 10,000 erase/write cycles Enhanced FLASH Program memory typical
  •  10,000,000 typical erase/write cycles EEPROM Data memory typical
  •  EEPROM Data Retention > 40 years
  •  In-Circuit Serial Programming™ (ICSP™) - via two pins
  •  Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
  •  Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation
  •  Code protection
  •  Power saving SLEEP mode
  •  Selectable oscillator options

CMOS Enhanced FLASH/EEPROM Technology:

  •  Low power, high speed technology
  •  Fully static design
  •  Wide operating voltage range:

                   - Commercial: 2.0V to 5.5V

                   - Industrial: 2.0V to 5.5V

  •  Low power consumption:

                    - < 2 mA typical @ 5V, 4 MHz

                    - 15 µA typical @ 2V, 32 kHz

                    - < 0.5 µA typical standby current @ 2V 

User Review (0)
Related Items